Drive Mode Set-Up
Pressing the Drive Mode Set-Up button on the touch-
screen within the Performance Control screen indicates
the real-time status of the various systems. Pressing
the Sport Mode Set-Up, Drag Mode Set-Up (1320 only),
or Default Mode Set-Up buttons on the touchscreen
allows the driver to configure their individual perfor-
mance control and see how those configurations affect
the performance of the vehicle.
NOTE:
Not all of the options listed in this manual are available
on every vehicle. Here is a chart with all available Per-
formance Control vehicle configurations:
Available Mode Configurations
Engine If Manual Transmission
Engine/Transmission If Auto Transmission
Steering X
Paddle Shifters If Auto Transmission
Traction Control X
Suspension If Adaptive Suspension
Refer to the Sport and Default Modes for their detailed
operation.
NOTE:
These settings will remain in effect when using the
Launch Control feature.
Default Mode
The vehicle will always start in Default Mode. This mode
is for typical driving conditions. While in Default Mode,
the Engine, Transmission and Traction will operate in
their Normal settings and cannot be changed.
The Steering Assist may be configured to “Normal”,
“Sport”, or “Comfort” by pressing the corresponding
button on the touchscreen. The Paddle Shifters
(if equipped) may be enabled or disabled while in this
mode.
Launch Control
WARNING!
Launch Control is intended for off-highway or off-road
use only and should not be used on any public road-
ways. It is recommended that this feature be used in
a controlled environment, and within the limits of the
law. The capabilities of the vehicle as measured by
the performance pages must never be exploited in a
reckless or dangerous manner, which can jeopardize
the user’s safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent accidents.
Performance Control Set-Up
Default Mode
Default Mode Set-Up
MULTIMEDIA 135
5
5548538-23_LA_OM_EN_USC_t_E2.pdf 135 4/7/2023 2:38:38 PM
To Next Page
Loading...
