Dodge CHALLENGER 2023 - Fluid Capacities; Engine Fluids and Lubricants

FLUID CAPACITIES
US Metric
Fuel (Approximate)
All Engines 18.5 gal 70 L
Engine Oil With Filter
3.6L Engine 6 qt 5.6 L
5.7L Engine 7 qt 6.6 L
Cooling System*
3.6L Engine 11.1 qt 10.5 L
5.7L Engine 14.7 qt 13.9 L
* Includes heater and coolant recovery bottle filled to MAX level.
ENGINE FLUIDS AND LUBRICANTS
Component Fluid, Lubricant, or Genuine Part
Engine Coolant We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT
(Organic Additive Technology).
Engine Oil – 3.6L Engine We recommend using Mopar® SAE 5W-20 Full Synthetic Engine Oil which meets the requirements of
the manufacturer Material Standard MS-6395. Equivalent full synthetic SAE 5W-20 engine oil can be
used but must have the API Starburst trademark
page 200.
Mopar® SAE 5W-30 engine oil approved to the manufacturer Material Standard MS-6395 may be used
when SAE 5W-20 engine oil meeting MS-6395 is not available.
Engine Oil – 5.7L Engine We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the requirements of
the manufacturer Material Standard MS-6395. Equivalent full synthetic SAE 0W-20 engine oil can be
used but must have the API Starburst trademark
page 200.
Fuel Selection – 3.6L Engine 87 Octane (R+M)/2 Method, 0-15% ethanol.
Fuel Selection – 5.7L Engine With Automatic Transmission 89 Octane recommended – 87 Octane acceptable (R+M)/2 Method, 0-15% ethanol.
Fuel Selection – 5.7L Engine With Manual Transmission 91 Octane or higher (R+M)/2 Method, 0-15% ethanol.
238 TECHNICAL SPECIFICATIONS
5548538-23_LA_OM_EN_USC_t_E2.pdf 238 4/7/2023 2:38:40 PM