GET STARTED
The Voice Recognition (VR) button is used to
activate/deactivate your Voice Recognition system.
Helpful hints for using Voice Recognition:
•
Reduce background noise. Wind and passenger
conversations are examples of noise that may
impact recognition.
•
Speak clearly at a normal pace and volume while
facing straight ahead.
•
Each time you give a Voice Command, you must first
push the Voice Recognition (VR) button, wait until
after the beep, then say your Voice Command.
•
You can interrupt the help message or system
prompts by pushing the VR button and saying a
Voice Command from the current category.
ADDITIONAL INFORMATION
© 2023 FCA US LLC. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar Owner
Connect is a trademark of FCA US LLC. SiriusXM® and
all related marks and logos are trademarks of
SiriusXM® Radio Inc.
page 243.
Uconnect System Support:
•
US residents visit www.DriveUconnect.com or call:
1-877-855-8400 (24 hours a day 7 days a week)
•
Canadian residents visit www.DriveUconnect.ca or
call: 1-800-465-2001 (English) or 1-800-387-9983
(French)
SiriusXM Guardian™ services support:
•
US residents visit
www.driveuconnect.com/sirius-xm-guardian or call:
1-844-796-4827
•
Canadian residents visit
https://www.driveuconnect.ca/en/sirius-xm-guardian
or call: 1-877-324-9091
DRIVER MEMORY SETTINGS —
IF EQUIPPED
This feature allows the driver to save up to two different
memory profiles for easy recall through a memory
switch. Each memory profile saves desired position set-
tings for the following features:
•
Driver seat cushion
•
Easy Entry/Exit seat operation (if equipped)
•
Side mirrors
•
Power tilt/telescoping steering column (if equipped)
•
A set of desired radio station presets
NOTE:
•
Your vehicle is equipped with two key fobs, each can
be linked to either memory position 1 or 2.
•
Be sure to program the radio presets prior to pro-
gramming the memory settings.
The memory settings switch is located on the driver’s
door trim panel. The switch consists of three buttons:
•
The set (S) button, which is used to activate the
memory save function.
•
The (1) and (2) buttons which are used to recall
either of two saved memory profiles.
Uconnect Voice Command Buttons
1 — Push To Start Or Answer A Phone Call And Send Or
Receive A Text
2 — Push The Voice Recognition Button To Begin Radio,
Media, Navigation, And Climate Functions
Memory Settings Switch
GETTING TO KNOW YOUR VEHICLE 25
2
5548538-23_LA_OM_EN_USC_t_E2.pdf 25 4/7/2023 2:38:35 PM
To Next Page
Loading...
