This system conveniently allows the driver to select a
variety of useful information by pushing the arrow but-
tons located on the left side of the steering wheel. The
instrument cluster display menu items may consist of
the following:
Speedometer Vehicle Info Performance —
If Equipped
Driver Assist —
If Equipped
Fuel Economy Trip
Audio Messages Screen Setup
Diagnostics —
If Equipped
The system allows the driver to select information by push-
ing the following buttons mounted on the steering wheel:
Up And Down Arrow Buttons:
Using the up or down arrow button allows you
to cycle through the Main Menu Items.
Changes the Main Screen area and Menu Title area.
Left And Right Arrow Buttons:
Using the left
or right arrow button allows you
to cycle through the submenu items of the Main menu
item.
NOTE:
•
Holding the up or down or left or right
arrow button will loop the user through the cur-
rently selected menu or options presented on the
screen.
•
Upon returning to a main menu, the last submenu
screen viewed within that main menu will be
displayed.
OK Button:
For Digital Speedometer:
•
Pushing the OK button changes units (mph
or km/h).
For Screen Setup:
•
OK button allows user to enter menu and
submenus.
•
Within each submenu layer, the up and down
arrow buttons will allow the user to select the
item of interest.
•
Pushing the OK button makes the selection and a
confirmation screen will appear (returning the user
to the first page of the submenu).
•
Pushing the left
arrow button will exit each sub-
menu layer and return to the main menu.
For the Trip and Fuel Economy menus (and Perfor-
mance Timers) — If Equipped:
•
Information is reset by pushing and holding the OK
button.
ENGINE OIL LIFE RESET
Use this QR code to access your digital
experience.
Oil Change Required
Your vehicle is equipped with an engine
oil change indicator system. The “Oil
Change Required” message will display
in the instrument cluster display for five seconds after a
single chime has sounded, to indicate the next sched-
uled oil change interval. The engine oil change indicator
system is duty cycle based, which means the engine oil
change interval may fluctuate, dependent upon your
personal driving style.
Unless reset, this message will continue to display each
time you place the ignition in the ON/RUN position. To
turn off the message temporarily, push and release the
OK or arrow buttons. To reset the oil change indicator
system (after performing the scheduled maintenance),
refer to the following procedure.
Vehicles Equipped With Keyless Enter ‘n Go™ — Ignition
Use the steering wheel instrument cluster display con-
trols for the following procedure(s):
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition in the
ON/RUN position (do not start the engine).
Instrument Cluster Display Controls
1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button
Scan me
GETTING TO KNOW YOUR INSTRUMENT PANEL 53
3
5548538-23_LA_OM_EN_USC_t_E2.pdf 53 4/7/2023 2:38:35 PM
To Next Page
Loading...
