If the conditions are not met, a pop-up message will
display for 5 seconds, describing the required condi-
tions, and then the Oil Life screen will reappear.
Battery Voltage
•
Displays the actual battery voltage.
All Wheel Drive (AWD) Status — If Equipped
•
Displays the status of the All - Wheel Drive system.
Performance Features
WARNING!
Measurement of vehicle statistics with the Perfor-
mance Features is intended for off-highway or track
use only and should not be done on any public road-
ways. It is recommended that these features be used
in a controlled environment and within the limits of
the law. The capabilities of the vehicle as measured
by the performance pages must never be exploited in
a reckless or dangerous manner, which can jeopar-
dize the user’s safety or the safety of others. Only a
safe, attentive, and skillful driver can prevent acci-
dents.
Push and release the up
or down arrow button
until the Performance menu is displayed in the instru-
ment cluster display. Push the right
or left
arrow button to enter the submenus.
The Performance Features include the following:
•
0-60 mph (0-100 km/h) Timer
○ Best
○ Last
○ Recent
○ Reaction Timer
•
0-100 mph (0-160 km/h) Timer
○ Best
○ Last
○ Recent
○ Reaction Timer
•
1/8 Mile (200 meters) Timer
○ Best
○ Last
○ Recent
○ Reaction Timer
•
1/4 Mile (400 meters) Timer
○ Best
○ Last
○ Recent
○ Reaction Timer
•
Braking Distance
○ Distance
○ From Speed
•
Current G-Forces
•
Peak G-Forces
•
Lap Timer
•
Lap History
○ Will list the last five laps with the best lap high-
lighted in green.
•
Top Speed
The following describes each feature and its operation:
Driver Assist — If Equipped
Adaptive Cruise Control (ACC) Menu
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the ACC ON/OFF button (located on the steering
wheel) until one of the following displays in the instru-
ment cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read “Adaptive
Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting
has not been selected, the display will read “Adaptive
Cruise Control Ready.”
Push the SET + or the SET- button (located on the steer-
ing wheel) and the following will display in the instru-
ment cluster display:
ACC SET
When ACC is set, the set speed will display in the instru-
ment cluster.
If the Driver Assist main menu is not selected, an ACC
pop-up message may display if any ACC activity occurs,
which may include any of the following:
•
Distance Setting Change
•
System Cancel
•
Driver Override
•
System Off
•
ACC Proximity Warning
•
ACC Unavailable Warning
The instrument cluster display will return to the last
display selected after five seconds of no ACC display
activity
page 77.
GETTING TO KNOW YOUR INSTRUMENT PANEL 55
3
5548538-23_LA_OM_EN_USC_t_E2.pdf 55 4/7/2023 2:38:35 PM
To Next Page
Loading...
