For the Uconnect 4 With 7-inch Display and the
Uconnect 4/4C/4C NAV With 8.4-inch Display
Press the
Apps button, then press the Settings
button on the touchscreen to display the menu setting
screen. In this mode, the Uconnect system allows you
to access programmable features.
NOTE:
•
All settings should be changed with the ignition in
the ON/RUN position.
•
Only one area of the touchscreen may be selected
at a time.
When making a selection, press one button on the
touchscreen to enter the desired menu. Once in the
desired mode, press and release the preferred setting
option until a check mark appears next to the setting,
showing that setting has been selected. Once the set-
ting is complete, either press the Back Arrow button on
the touchscreen to return to the previous menu, or
press the X button on the touchscreen to close out of
the settings screen. Pressing the Up or Down Arrow but-
ton on the right side of the screen will allow you to
toggle up or down through the available settings.
NOTE:
Availability of settings, setting names, and menu
options can vary depending on vehicle features,
equipped Uconnect system, and the currently installed
software.
Language
When the Language button is pressed on the touchscreen, the system displays the different language options. Once an option is selected, the system will display in the chosen
language.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name Description
Language This setting will change the language of the Uconnect system. The available languages
are English, Français, and Español.
Display
When the Display button is pressed on the touchscreen, the system will display the options related to the theme (if equipped), brightness, and color of the touchscreen. The
available settings are:
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name Description
Display Mode This setting will allow you to set the brightness manually or have the system set it auto-
matically. The “Auto” setting has the system automatically adjust the display bright-
ness. The “Manual” setting will allow the user to adjust the brightness of the display.
Display Brightness With Headlights ON This setting will allow you to set the brightness when the headlights are on. To access
this setting, Display Mode must be set to Manual. The “+” setting will increase the
brightness; the “-” will decrease the brightness.
96 MULTIMEDIA
5548538-23_LA_OM_EN_USC_t_E2.pdf 96 4/7/2023 2:38:37 PM
To Next Page
Loading...
