EasyManua.ls Logo

Dodge CHALLENGER SRT 2017 - A Word About Your Keys; Keyless Push Button Ignition

Dodge CHALLENGER SRT 2017
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A WORD ABOUT YOUR KEYS
Your vehicle uses a keyless ignition system. This system
includes a key fob and a Keyless Push Button Ignition.
Keyless Push Button Ignition
This feature allows the driver to operate the ignition with
the push of a button as long as the key fob is in the
passenger compartment.
The Keyless Push Button Ignition has four operating
positions, three of which are labeled and will illuminate
when in position. The three positions are OFF, ACC, and
ON/RUN. The fourth position is START. During start,
ON/RUN will illuminate.
NOTE: In case the ignition does not change with the push
of a button, the key fob may have a low or dead battery. In
this situation, a back up method can be used to operate the
ignition switch. Put the nose side (side opposite of the
emergency key) of the key fob against the engine START/
STOP button and push to operate the ignition.
Key Fobs
NOTE: SRT vehicles, equipped with the 6.2L Supercharged
engine, come with three key fobs (two red and one black)
that allow for different engine power levels. Please refer to
the Drive Modes in the “Uconnect Settings” section for
further descriptions.
Keyless Push Button Ignition
1—OFF
2 ACC (Accessory)
3 ON/RUN
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9

Table of Contents

Related product manuals