2. The seat belt latch plate is contacting the seat when the
belt is routed through the seat web guide. When the
belt is routed outside of the seat web guide, the latch
plate will contact the quarter trim panel. Grasp the
latch plate and pull out the belt. Slide the latch plate
up the webbing as far as necessary to make the belt go
around your lap.
3. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”
Latch Plate
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
