3. Remove the slack in the tether strap so that the anchor
strap is pulled tight.
Tether Straps at the Rear Passenger Seat (Crew Cab)
1. Route the child restraint tether strap under the head
restraint for the outboard seating positions, and then
through the anchor strap outer loop (webbing material
loop), located directly behind the child restraint.
2. Route the tether strap across to the nearest installed
anchor strap, and attach the tether strap hook to the
anchor strap inner metal ring.
3. Remove the slack in the tether strap so that both
anchor straps are pulled tight.
Tether Strap Routing
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73
To Next Page
Loading...
