Pull down on the tether to unhook it from the plastic seat
backing, then raise the armrest and attach the tether hook
to the strap located on the front of the arm rest.
For center seating position route the tether strap over the
seatback and headrest then attach the hook to the tether
anchor located on the back of the seat. For the outboard
seating positions, route the tether under the head re-
straints, and attach the hook to the top tether anchor
located on the back of the seat. To access the top tether
strap anchorages behind the rear seat, pull the carpeted
floor panel away from the seat back, this will expose the
top tether strap anchorages.
Center Seat Position Arm Rest Tether Attached
Pulling Down The Carpet Floor Panel To Access Top
Tether Strap
102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
