Spare Tire Stowage
• The spare tire is stowed under the rear of
the vehicle by means of a cable winch
mechanism. To remove or stow the spare,
use the jack handle/lug wrench con-
nected to the square socket extension to
rotate the “spare tire drive” nut. The nut
is located under a plastic cover at the
center-rear of the cargo floor area, just
inside the liftgate opening.
Spare Tire Removal
1. Remove the jack tools from the bag.
2. Raise the protective rubber mat covering the storage compartment floor and remove the
plug to access the winch drive.
3. Fit the jack handle extension over the drive nut. Use the lug wrench handle and extension
to completely lower the spare tire. Keep turning the handle until the winch STOPS.
NOTE:
Do not use power tools to operate the winch.
WHAT TO DO IN EMERGENCIES
139
To Next Page
Loading...
