Rotate the plastic thumb screw on the end of the jack to loosen the jack and remove from
the bracket.
Spare Tire Stowage
The spare tire is stowed under the rear of the vehicle by means of a cable winch
mechanism. To remove or stow the spare, use the jack handle/lug wrench connected to the
square socket extension to rotate the “spare tire drive” nut. The nut is located under a
plastic cover at the center-rear of the cargo floor area, just inside the liftgate opening.
CAUTION!
Do not use power tools to winch the tire up or down. Impact type tools can damage the
winch mechanism.
Spare Tire Removal
1. Remove the jack tools from the bag.
2. Raise the rubber mat and remove the plug from storage compartment floor .
Jack Removal
Spare Tire Location
WHAT TO DO IN EMERGENCIES
211
To Next Page
Loading...
