270 IN CASE OF EMERGENCY
3. Fit the jack handle extension over the drive
nut. Use the lug wrench handle and
extension to completely lower the spare tire.
Keep turning the handle counterclockwise
until the winch stops.
Winch Location
Wrench Rotation
4. Slide the tire out from under the vehicle and
rotate it vertically behind the rear bumper.
Spare Tire
5. Pull the metal stamping toward you to
release it from the plastic plate.
Spare Tire Retainer
6. Slide the metal stamping up the steel
extension tube and winch cable. Rotate the
metal stamping and push it through the
hole in the plastic plate and wheel.
Sleeve And Cable
20_WD_OM_EN_USC_t.book Page 270
To Next Page
Loading...
