Offset Driving
ACC may not detect a vehicle in the same lane
that is offset from your direct line of travel, or a
vehicle merging in from a side lane. There may
not be sufficient distance to the vehicle ahead.
The offset vehicle may move in and out of the
line of travel, which can cause your vehicle to
brake or accelerate unexpectedly.
Turns And Bends
When driving on a curve with ACC engaged, the
system may decrease the vehicle speed and
acceleration for stability reasons, with no target
vehicle detected. Once the vehicle is out of the
curve the system will resume your original set
speed. This is a part of normal ACC system
functionality.
NOTE:
On tight turns ACC performance may be limited.
Using ACC On Hills
When driving on hills, ACC may not detect a
vehicle in your lane. Depending on the speed,
vehicle load, traffic conditions, and the steep-
ness of the hills, ACC performance may be
limited.
Lane Changing
ACC may not detect a vehicle until it is com-
pletely in the lane in which you are traveling. In
the illustration shown, ACC has not yet detected
the vehicle changing lanes and it may not detect
the vehicle until it’s too late for the ACC system
to take action. ACC may not detect a vehicle
until it is completely in the lane. There may not
be sufficient distance to the lane-changing ve-
hicle. Always be attentive and ready to apply the
brakes if necessary.
Offset Driving Condition Example
Turn Or Bend Example
ACC Hill Example
Lane Changing Example
175
To Next Page
Loading...
