EasyManua.ls Logo

Dodge Durango SRT 2018 - Page 267

Dodge Durango SRT 2018
664 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE:
FCA US LLC or your dealer may contact you
directly regarding software updates.
To help further improve vehicle security and
minimize the potential risk of a security
breach, vehicle owners should:
Routinely check
www.driveuconnect.com/software-update
to learn about available Uconnect software
updates.
Only connect and use trusted media devices
(e.g. personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communica-
tions cannot be assured. Third parties may
unlawfully intercept information and private
communications without your consent. For fur-
ther information, refer to “Onboard Diagnostic
System (OBD II) Cybersecurity” in “Getting To
Know Your Instrument Panel”.
UCONNECT SETTINGS
The Uconnect system uses a combination of
buttons on the touchscreen and buttons on the
faceplate located on the center of the instrument
panel that allow you to access and change the
customer programmable features. Many fea-
tures can vary by vehicle.
Customer Programmable Features
Uconnect 4C/4C NAV Settings
Press the “Apps button, then press the
“Settings” button on the touchscreen to display
the menu setting screen. In this mode the
Uconnect system allows you to access pro-
grammable features that may be equipped such
as Display, Units, Voice, Clock, Safety & Driving
Assistance, Lights, Doors & Locks, Auto-On
Comfort, Engine Off Options, Audio, Phone/
Bluetooth, Restore Settings, Clear Personal
Data, and System Information.
NOTE:
Depending on the vehicles options, feature set-
tings may vary.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting “option” until a check-mark
appears next to the setting, showing that setting
has been selected. Once the setting is com-
plete, either press the “Back” Arrow button on
the touchscreen to return to the previous menu,
or press the “X” button on the touchscreen to
close out of the settings screen. Pressing the
“Up” or “Down” Arrow button on the right side of
the screen will allow you to toggle up or down
through the available settings.
Uconnect 4C/4C NAV Buttons On Faceplate
And Buttons On Touchscreen
1 Uconnect Buttons On The Touchscreen
2 Uconnect Buttons On The Faceplate
264

Related product manuals