The “Tickets” contain the timers listed below:
Reaction Time
• Measures the driver's reaction time for launching the vehicle against a
simulated drag strip timing light (behavior modeled after 500 Sports-
man Tree) displayed in the instrument cluster display.
NOTE: The Reaction Time, MPH, ⅛ and ¼ Mile timers will be “ready” when
the vehicle is at 0 MPH (0 km/h).
0-60 MPH (0-100 km/h)
• Displays the time it takes for the vehicle to go from 0 to 60 mph (0 to
100 km/h).
0-100 MPH (0-160 km/h)
• Displays the time it takes for the vehicle to go from 0 to 100 mph (0 to
160 km/h).
60 feet (20 meter) ET
• Displays the time is takes the vehicle to go 60 feet (20 meters).
⅛ Mile (200 meter) ET
• Displays the time it takes for the vehicle to go an ⅛ mile (200 meters).
⅛ Mile (200 meter) MPH
• Displays the vehicle speed at the time ⅛ mile (200 meters) was
reached.
¼ Mile (400 meter) ET
• Displays the time it takes for the vehicle to go ¼ mile (400 meters).
¼ Mile (400 meter) MPH
• Displays the speed the vehicle was at when ¼ mile (400 meters) was
reached.
Brake Distance ft
• Displays the distance it takes the vehicle to make a full stop.
NOTE: The distance measurement will be aborted if the brake pedal is
released or the parking brake is engaged, before the vehicle comes to a
complete stop.
Brake from MPH
• Displays the speed the vehicle is traveling when the brake pedal is
pressed.
NOTE: Brake Distance and Speed timers only displays "ready" when vehicle
is traveling at greater than 30 MPH (48 km/h).
PERFORMANCE PAGES
10
To Next Page
Loading...
