•
Bi-Level
Air is directed through the panel and floor out-
lets. For vehicles equipped with a three-zone
system, air is also directed through the outlets in the
headliner, unless the climate control for the rear pas-
sengers is ON and in Floor mode.
NOTE: For all settings except full cold or full hot, there
is a difference in temperature between the upper and
lower outlets. The warmer air flows to the floor outlets.
This feature gives improved comfort during sunny but
cool conditions.
•
Floor
Air is directed through the floor outlets with a
small amount flowing through the defrost and
side window demist outlets. For vehicles equipped
with a three-zone system, air is directed through the
floor outlet in the right quarter trim panel, unless the
climate control for the rear passengers is ON and in
Panel mode.
•
Mix
Air is directed through the floor, defrost, and
side window demist outlets. For vehicles
equipped with a three-zone system, air is di-
rected through the floor outlet in the right quarter trim
panel, unless the climate control for the rear passen-
gers is ON and in Panel mode.
NOTE: This setting works best in cold or snowy condi-
tions that require extra heat to the windshield. This
setting is good for maintaining comfort while reducing
moisture on the windshield.
282 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
