6. Recirculation Mode Control
Press and release to change the current setting. The
indicator illuminates when ON.
Note
1
- The A/C compressor operates in Mix and
Defrost, or a blend of these modes, even if the A/C
control is not pressed. This dehumidifies the air to help
dry the windshield. To improve fuel economy, use these
modes only when necessary.
Note
2
- The A/C will engage automatically to prevent
fogging when the Recirculation button is pressed and the
Mode control is set to Panel or Panel/Floor. The A/C can
be deselected manually without disturbing the Mode
control selection.
Note
3
- For maximum cooling, useA/C and recirculation
at the same time. If economy mode is desired, turn OFF
the A/C and turn the Temperature control to the desired
temperature setting.
Two- and Three-Zone Manual Air Conditioning
and Heating Systems — If Equipped
1. Left Front Temperature Control
Provides left front seat occupant with independent tem-
perature control. Turn left for cooler or right for warmer
temperature settings.
Two-Zone Manual Climate Control
UNDERSTANDING YOUR INSTRUMENT PANEL 285
4
To Next Page
Loading...
