BULB REPLACEMENT
Low Beam Headlight, High Beam Headlight, Front
Turn Signal/Park Light, Side Marker Light
1. Open the hood.
NOTE: It may be necessary to remove the air cleaner
filter housing and position the Totally Integrated Power
Module (TIPM) aside to replace certain the lights in the
left headlight housing.
2. Rotate the applicable bulb and connector assembly
1
⁄
4
turn counterclockwise and remove the assembly from the
headlight housing.
3. Disconnect the bulb from the harness connector and
then connect the replacement bulb.
1 — Front Turn Signal/Park Light Bulb
2 — Side Marker Light Bulb
3 — Low Beam Headlight Bulb
4 — High Beam Headlight Bulb
462 MAINTAINING YOUR VEHICLE
To Next Page
Loading...
