EasyManua.ls Logo

Dodge JOURNEY 2019 - To Disarm the System; Doors; Keyless Enter-N-Go - Passive Entry (if Equipped)

Dodge JOURNEY 2019
212 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Disarm The System
The vehicle security alarm can be disarmed
using any of the following methods:
Push the unlock button on the key fob.
Grasp the Passive Entry Unlock Door Handle
with a valid key fob within 5 ft (1.5 m) of the
passive entry door handle (if equipped, refer
to "Keyless Enter-N-Go Passive Entry" in
"Getting To Know Your Vehicle" for further
information).
Cycle the vehicle ignition system out of the
OFF position.
For vehicles equipped with Keyless
Enter-N-Go Passive Entry, push the
Keyless Enter-N-Go Ignition Start/
Stop button (requires at least one valid
key fob in the vehicle).
For vehicles not equipped with Keyless
Enter-N-Go, insert a valid key into the
ignition switch and turn the key to the ON
position.
NOTE:
The driver's door key cylinder and the liftgate
button on the key fob cannot arm or disarm
the vehicle security alarm.
When the vehicle security alarm is armed, the
interior power door lock switches will not un-
lock the doors.
The vehicle security alarm is designed to protect
your vehicle; however, you can create conditions
where the system will give you a false alarm. If
one of the previously described arming se-
quences has occurred, the vehicle security
alarm will arm regardless of whether you are in
the vehicle or not. If you remain in the vehicle
and open a door, the alarm will sound. If this
occurs, disarm the vehicle security alarm.
If the vehicle security alarm is armed and the
battery becomes disconnected, the vehicle se-
curity alarm will remain armed when the battery
is reconnected; the exterior lights will flash, the
horn will sound. If this occurs, disarm the ve-
hicle security alarm.
DOORS
Keyless Enter-N-Go Passive Entry
(If Equipped)
The Passive Entry system is an enhancement to
the vehicle’s Remote Keyless Entry (RKE) sys-
tem and a feature of Keyless Enter-N-Go. This
feature allows you to lock and unlock the vehi-
cle’s door(s) without having to push the key fob
lock or unlock buttons.
NOTE:
Passive Entry may be programmed ON/OFF;
refer to “Uconnect Settings” in “Multimedia”
in the Owner’s Manual for further information.
If wearing gloves on your hands, or if it has
been raining/snowing on the Passive Entry
door handle, the unlock sensitivity can be
affected, resulting in a slower response time.
GETTING TO KNOW YOUR VEHICLE
14

Table of Contents

Other manuals for Dodge JOURNEY 2019

Related product manuals