2 INTRODUCTION AND GENERAL INFORMATION
INTRODUCTION
This publication contains the essential removal,
installation, adjustment and maintenance procedures
for servicing all Body Styles. This information is cur-
rent as of time of publication.
INDEX
The preceding page contains a "Table of Contents"
which lists the group number and subject title of each
main group. The first page in each main group has an
index to the subjects included in that group.
PAGE NUMBERS
All page numbers consist of two sets of digits sepa-
rated by a dash. The digits preceding the dash identify
the main body. The digits following the dash represent
the consecutive page number within the particular
body unit. The page numbers can be found on the
upper left or right of each page.
TEXT
Unless otherwise specified, each service procedure
covers all body styles. Procedures covering specific
styles are identified by the car line letter, body type or
similar designation. A description of these designa-
tions is covered in this unit under "VEHICLE AND
ENGINE NUMBERS".
ILLUSTRATIONS
Where possible, illustrations are placed in close
proximity to the accompanying text and should be
used as part of the text.
ALPHABETICAL INDEX
An alphabetical index is found at the rear of the
Service Manual to aid in locating specific subject and
components.
MASTER TECHNICIAN'S SERVICE
CONFERENCE (M.T.S.C.)
Throughout the service manual, reference to
M.T.S.C. material for the subject can be found at the
beginning of the particular section. Example: M.T.S.C.
72-3 may be called out in the beginning of the subject
matter. This refers to the year 1972 and the session
issue number 3.
The Master Technician Service Conference is a
training supplement available wherever Chrysler Cor-
DD
o
DDDDDDD¤DD
CHRYSLER
CORPORATION
o
VEHICLE IDENTIFICATION NUMBER PLATE
INSTRUMENT PANEL LOCATED NR464
Fig, I— Vehicle Identification Number Plate
poration automotive services are available.
It should be clearly understood that the Master
Technician's Service Conference does not constitute
legal authority for performing service operations. Its
value lies in greater understanding of a specific sub-
ject, which results in increased ability to accurately
diagnosis malfunctions.
VEHICLE AND ENGINE NUMBERS
VEHICLE NUMBER: The vehicle number (serial
number) is located on a plate (Fig. 1) which is attached
to the instrument panel between the left windshield
wiper pivot and the left "A" post. It can easily be seen
by looking through the windshield from the outside.
All vehicle numbers contain thirteen digits. The
vehicle number is a code which tells the carline (1st
digit),
price class (2nd digit), body type (3rd and
4th digit), engine displacement (5th digit), model year
(6th digit), assembly plant (7th digit), and vehicle
sequence number (last six digits).
This vehicle number is also stamped on the engine
block and the transmission housing. On six cylinder
engines it is on a pad located below the number six
spark plug at the cylinder head joint face (Fig. 2).
On all eight cylinder engines it is on a pad located
just to the rear of the right engine mount on the pan
Fig. 2-A/f Six Cylinder Engines-Vehicle Number
Pad Location
MyMopar.com
To Next Page
Loading...
