Balance
The display will show the message ⬙BAL 00⬙ to indicate
that the balance function can be set. Turn the ROTARY
knob clockwise to transfer the sound to the right-hand
side; the display will show ⬙BAL R 01⬙. Turn the ROTARY
knob counterclockwise to transfer the sound to the
left-hand side; the display will show ⬙BALL01⬙. The
balance levels can be set between 0 and 15.
Fader
The display will show ⬙FAD 00⬙ to indicate that you can
set the Fader function. Turn the ROTARY knob clockwise
to transfer the sound to the front; the display will show
⬙FADF01⬙. Turn the ROTARY knob counterclockwise to
transfer the sound to the back; the display will show
⬙FADR01⬙. The fader levels are set from 0 to 15.
Loudness
The display will show ⬙LOUD 00⬙ to indicate that you can
set the loudness (enhanced sound) function. Turn the
ROTARY knob clockwise to enable the loudness function
at level 1; the display will show ⬙LOUD 01⬙ and the
LOUD flag will be enabled. The radio supports three
loudness levels.
Volume
Turn the ROTARY knob clockwise to increase the vol-
ume. Turning it counterclockwise will lower the volume.
The volume can be set between 0 and 30.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 177
To Next Page
Loading...
