100 GETTING TO KNOW YOUR VEHICLE
9. Push clamp wires up and under the flange of
box (or flange of Ram Box rail, if equipped) to
the Semi Clamped Position.
Semi Clamped Position
10. Push clamp handles upward to the clamped
position to properly engage the clamps.
Clamped Position
Improper Clamp Position
NOTE:
Once clamped, be sure the clamps are not partially
clamped to the truck bed flange.
The Tonneau Cover clamps can be locked when in
the clamped position by placing a lock through the
locking hole.
Locking Hole
TRI-FOLD TONNEAU COVER CLEANING
For proper cleaning of the Tonneau Cover, use
Mopar® Whitewall & Vinyl Top Cleaner and
Mopar® Leather & Vinyl Conditioner/Protectant.
CAUTION!
It is the driver’s responsibility to ensure the
Tonneau Cover is properly installed on the
vehicle. Failure to follow this procedure can
result in detachment of the Tonneau Cover from
the vehicle and/or damage to the vehicle/
Tonneau Cover.
22_DJD2_OM_EN_USC_t.book Page 100
To Next Page
Loading...
