472 TECHNICAL SPECIFICATIONS
6.7L DIESEL ENGINE
Brake Master Cylinder We recommend using Mopar® DOT 3 and SAE J1703.
Power Steering Reservoir
We recommend using Mopar® Power Steering Fluid +4 or Mopar® ATF+4
Automatic Transmission Fluid.
Component Fluid, Lubricant, or Genuine Part
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission – 68RFE
Only use ATF+4 Automatic Transmission Fluid. Failure to use ATF+4 fluid may
affect the function or performance of your transmission. We recommend
Mopar® ATF+4 fluid.
Automatic Transmission – AS69RC
Only use Mopar® ASRC Automatic Transmission Fluid or equivalent.Failure to
use the proper fluid may affect the function or performance of your
transmission.
Transfer Case We recommend using Mopar® BW44–44 Transfer Case Fluid.
Front and Rear Axle Fluid
We recommend using SAE 75W-85 HD Ram GL-5 Synthetic Axle Lubricant in
9.25 Front, 11.5 and 12.0 (Single Rear Wheel) Rear Axles. Use Mopar® GL-5
Synthetic Gear Lubricant SAE 75W-140 in 12.0 (Dual Rear Wheel) Rear axles.
Limited slip additive is required for limited slip axles. If the axle fluid is not
pre-mixed with limited slip additive we recommend using Mopar® MS-10111
Limited Slip Additive.
Brake Master Cylinder We recommend using Mopar® DOT 3 and SAE J1703.
22_DJD2_OM_EN_USC_t.book Page 472
To Next Page
Loading...
