Dodge Ram Power Wagon - Tail, Stop, Turn and Backup Lights

6. Twist connector on turn signal/park light bulb
1
⁄ 4 turn
and remove connector and bulb from housing.
7. Remove housing from vehicle with headlight halogen
bulb in housing.
8. Twist the headlight halogen bulb
1
⁄ 4 turn and remove
headlight bulb from the housing.
9. Replace headlight or turn signal bulb. Do not touch
the headlight halogen bulb.
10. Reverse procedure for installation of bulbs and hous-
ing.
Tail, Stop, Turn and Backup Lights
1. Remove the two (2) screws that pass through the bed
sheetmetal.
410 MAINTAINING YOUR VEHICLE