2004 Dodge Sprinter – October 1, 2003
32
Second body manufacturer
Work/modifications performed e.g. on the chassis, cab, body (panel
van) or fitting of additional assemblies and superstructures:
❑ ___________________________________________________
❑ ___________________________________________________
❑ ___________________________________________________
❑ ___________________________________________________
❑ ___________________________________________________
The work/modifications performed on the vehicle have been
subjected to quality control/final inspection.
No faults/defects were found.
Please check as appropriate:
❑ Work performed and equipment installed in accordance with
Sprinter Body Builder Guidelines.
❑
Special approval obtained from DaimlerChrysler Corporation
at telephone 704-655-1050 or 704-655-1054.
❑ Operating and maintenance instructions for the work/
modification performed and for equipment installed have
been added to the vehicle’s documentation.
Stamp of Body Manufacturer
____________________________________________________
Odometer reading Date Signature
To Previous Page
Loading...
