Need help?Do you have a question about the DogWatch BIGLEASH and is the answer not in the manual?
General| Brand | DogWatch |
|---|---|
| Model | BIGLEASH |
| Category | Pet Care Product |
| Language | English |
Instructions for registering your warranty online with BigLeash or DogWatch.
Details on interpreting battery status lights and icons on transmitter and receiver.
Contact information for customer service regarding battery replacement.
How to use the test light to confirm the remote trainer system is functioning correctly.
A lanyard is supplied with each transmitter for convenient carrying.
Details on transmitter range and factors affecting it, like antenna position.
Guide to adjusting the training level from 0 to 15 for optimal dog response.
Explanation of icons, signal strength, battery status, and training levels on the LCD.
Information on programming and using the transmitter with one or two dogs.
Description of the functions of buttons A (Audible/Vibration), B (Brief), and C (Continuous).
Step-by-step instructions for setting the transmitter to Audible or Vibration mode.
Explanation of the receiver's battery status light colors and their meanings.
How to activate and use the Firefly nightlight feature on the receiver collar.
Guidance on selecting and fitting the correct contact posts for the receiver collar.
Instructions on how to properly fit the receiver collar snugly on the dog's neck.
How the 'A' button provides an audible or vibration warning for up to 8 seconds.
How the 'B' button delivers a single, brief 1-second correction.
How the 'C' button provides a continuous correction for up to 8 seconds.
Guidance on starting training at Level 1 and gradually increasing it for dog response.
Tips for creating a positive training environment with praise and engagement.
Understanding that dogs respond differently to training signals.
Emphasis on consistent training signals and correct timing with behavior.
Strategies for successful training sessions in distraction-free environments.
Using the remote trainer to reinforce basic obedience commands like 'come', 'sit', 'stay'.
Teaching dogs to associate training signals with problem behaviors to stop them.
Using the trainer for excessive or overly aggressive barking, not natural barking.
Training dogs to stop digging in unacceptable areas by sending a signal.
Training dogs not to chase cars, emphasizing timing and signal type.
Methods for correcting dogs jumping up for attention or on furniture.
Establishing 'off limits' rules for furniture and consistent training.
Teaching acceptable and unacceptable chewing habits with training signals.
Product not recommended for aggressive dogs; consult a professional.
Steps to resolve issues if the transmitter and receiver are not functioning.
Troubleshooting steps for when the dog does not seem to respond to the collar.
Causes and solutions for a reduced transmission range.
Troubleshooting for batteries that do not hold a charge, and replacement contact info.
Steps to re-establish communication between transmitter and receiver.
Understanding how cold weather affects battery performance and signal strength.
Instructions on how to register your warranty online within 30 days of purchase.
Details on the 2-year limited warranty for parts/labor and 1-year for batteries.
Information on what is covered, excluded, and voided under the warranty.
Steps for returning the unit for repair, including shipping and required information.
Step-by-step guide to programming a second receiver collar for use with the transmitter.
Instructions for re-programming the first receiver collar to the transmitter.
To Next Page
