To Next PageTo Next Page
Need help?Do you have a question about the DOLLAMUR FLEXI-Roll and is the answer not in the manual?
Use mat only with proper training and supervision; avoid unsupervised use.
Ensure sufficient space for safe maneuver performance.
Perform maneuvers to avoid contact with instructors, bystanders, or other users.
Inspect mat for damage, defects, or wear before and after each use. Repair or replace if damaged.
Check mat positioning and security before each use. Read owner manual.
Mat must not be used as a landing mat under any circumstances.
Understand personal and product limitations; follow progressive learning techniques and consult instructor.
Frequently clean mats according to Dollamur MAINTENANCE WARNING guidelines.
Clean carpet surface like normal carpet; use non-abrasive cleaner and spot test.
Allow 2 hours for mat acclimatization in a custom area before cutting. Use at room temperature.
Handle rolls cautiously to avoid punctures and damage. Store upright on a flat surface.
Details on Hook Fastening Rolls and Boundary Rolls for securing mats and marking areas.
When rolling to storage, continue rolling in the same direction the mat was originally rolled up.
A two-wheeled dolly is recommended as an easy way to transport rolls.
Carefully remove packaging using a sharp object. Place rolls on their side.
Unfasten straps, store them for future use, and do not discard.
Unroll mats with the carpet side facing up, as they were rolled for storage.
Push rolled-out mats together to form one surface. Avoid kicking edges to position.
Push the mat edge into place slowly with hands to avoid damage. Align edges to eliminate gaps.
Center Dollamur Hook & Loop Fastener over seams and secure firmly to the carpet.
Remove hook & loop, roll mats back up carpet-side in, folding to form a triangle. Keep mat tight.
Keep roll edges square and avoid coning by rolling slowly.
Affix straps approximately 18 inches from edges, rolling the mat into the middle of the straps.
Secure straps around the mat. For transport, maintain original rolling direction.
If coning occurs, stand mat on end with straps secured. Shake gently to align edges.
Details warranty periods for different mat types and specifies coverage for defects.
Outlines requirements for warranty validity, including proper installation and use.
Specifies what is not covered, such as cosmetic changes and normal wear and tear.
Clarifies warranty for FLEXI-Connect®, excluding damage from improper handling.
Covers responsibilities for freight costs related to valid warranty claims.
General