Dolle LOFT LADDER - Installation Instructions; Positioning the Loft Ladder

2.
Installation instructions:
To ensure that the product is assembled and tted correctly,
these instructions should be followed carefully. If you have
any difculties, contact your dealer for assistance.
WARNING: DO NOT DISMANTLE the attic ladder once it
has been assembled.
NB! For models in which the ladder is fixed to the trapdoor
(not clickFIX
®
model). If, during installation, you wish to
detach the ladder to reduce the weight of the attic ladder,
loosen the screws between the metal bracket and the ladder
itself. Do not loosen the screws on the trapdoor as these can
easily be overtightened when reassembled. An overtightened
screw may lose its grip on the timber and, in serious cases,
fall out.
Positioning the loft ladder:
Wear gloves when removing insulation material. Check that
the area selected for positioning the ladder is unencumbe-
red by electrical wiring, water pipes, heating/cooling pipes,
etc. If necessary, get a qualied craftsman to remove such
encumbrances. Make sure that there is sufcient clearance
(distance A) for the ladder to rest on the oor. Make sure that
there is sufcient space for the ladder to fold out to its full
length (B) (see gure 1). For two-section models, make sure
that there is sufcient swing space.
For specic measurements and adjustment options, see the
assembly instructions supplied with the product.