To Next PageTo Next Page
Need help?Do you have a question about the Dolmar TM-92.14-H and is the answer not in the manual?
General| Engine Type | 4-stroke, single-cylinder |
|---|---|
| Cutting Width | 92 cm |
| Cutting Height | 25 - 75 mm |
| Mulching | Yes |
| Cutting Height Adjustment | Central |
| Cutting Height Adjustments | central, 7-stage |
Explains how emphasis is used for safety and operation information in the manual.
Provides detailed safety regulations for training, preparation, and operation of the machine.
Explains the meaning of various safety labels placed on the machine for user guidance.
Details regulations and requirements for safely towing a trailer with the machine.
Details the identification plate and its essential data, including serial number.
Lists and describes the main functional components of the machine.
Instructions for carefully removing parts from the packaging and identifying contents.
Step-by-step guide on how to attach the steering wheel to the machine.
Instructions for securing the seat onto its mounting plate using screws.
Details on positioning the battery and connecting its cables to the terminals.
Guide on attaching the grass-catcher brackets to the rear plate of the machine.
Step-by-step process for assembling the grass-catcher frame, cover, and stiffening bar.
Describes the function of the steering wheel in turning the front wheels.
Explains how the lever regulates engine speed (RPM) and its positions.
Details the three positions of the key switch: OFF, ON, and START.
Explains the function and two positions (OFF/ENGAGED) of the parking brake lever.
Describes the function of the light switch for turning on the lights.
Explains the pilot lamp and audible signals for machine status.
Details the two positions of the lever for engaging/disengaging blades and activating the brake.
Describes the seven positions of the lever for adjusting cutting height.
Explains the lever's function for emptying the grass-catcher.
Details the dual function pedal for clutch engagement and rear wheel braking.
Explains the lever for selecting 5 forward speeds, neutral, and reverse.
Describes the pedal used for braking the rear wheels on hydrostatic models.
Explains the pedal for engaging drive and modulating forward/reverse speeds.
Details the lever to release the hydrostatic transmission for manual movement.
Provides crucial safety advice for operating the machine, including dangers and precautions.
Explains how safety devices prevent starting or stop the engine under specific conditions.
Outlines essential checks and operations before starting work for safety and results.
Covers starting the engine, moving without mowing, braking, reverse, and grass cutting.
Provides specific precautions and techniques for mowing on slopes safely.
Instructions on how to safely transport the machine on trucks or trailers.
Tips and recommendations for achieving optimal lawn cutting results.
Crucial safety advice and warnings before performing any maintenance or repair work.
Guidelines for safely lifting the machine vertically for access to the underside.
Details on regular checks, lubrication points, and required lubricants.
A table outlining maintenance tasks, frequencies, and intervals for upkeep.
Instructions for engine oil changes and following the engine manual.
Advice on keeping the battery charged for long life and proper function.
Summarizes common issues and necessary checks/adjustments for performance.
Procedures for replacing wheels, tyres, bulbs, fuses, and belts.
Addresses issues where the light remains off with the key in the ON position.
Troubleshoots when the light flashes and the starter motor does not operate.
Diagnoses why the starter motor doesn't run despite the light being on.
Identifies causes for the starter motor running but the engine failing to start.
Solutions for issues with starting the engine or its erratic operation.
Addresses low engine power during cutting and potential causes.
Troubleshoots when the engine stops, but the indicator light continues to flash.
Diagnoses why the engine stops and the indicator light turns off.
Solves problems where the engine stops but the indicator light remains illuminated.
Provides solutions for when the blades fail to engage properly.
Addresses issues causing uneven cutting or poor grass collection.
Solutions for unexpected vibrations experienced while operating the machine.
Troubleshoots why the machine fails to move when the drive pedal is pressed.
Details front counterweights for improving stability on slopes.
Describes the kit used instead of the grass-catcher to prevent ejected objects.
Information on the hitch for towing a small trailer.
Explains the cover used for protecting the machine from dust during storage.
Details the charger for maintaining battery charge during storage.
Describes the kit that chops grass cuttings and leaves them on the lawn.
Provides detailed technical data including electrical system, tyres, weight, and speeds.
