DOM 648 - User Manual

Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardwares.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO: 648
NUMÉRO DU MODÈLE : 648
INSTRUCTIONS D'ASSEMBLAGE.
Notez s'il vous plaît que l'avertissement sur la table à langer
est exigé par la loi de la CPSC et l'ASTM, qui nous oblige d'in-
former les parents et les personnes en charge des enfants.
Nous nous excusons pour toute inconvenance que cela pour-
rait vous causer.
L'assemblage par un adulte de ce meuble est nécessaire.
Les petites pièces non-assemblées présentent le risque d'étouffement.
Pour vous aider pendant l'assemblage de votre produit, veuillez trouver
en bas des instructions simples, en étape. Avant de commencer
1
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788
FAMILY
Dream On Me Brookside Toddler bed

Summary

General Safety Warnings

Hardware and Tool Diagram

Component Parts

Assembly Steps

Step 1: Connect Side Bars

Connect side bars using wood dowels, ensuring proper alignment for subsequent steps.

Step 2: Attach Side Bars with Plates

Connect side bars using L metal plates and self-drilling screws.

Step 3: Insert Cross Bars and Split Legs

Insert cross bars into left side bars and attach split legs to the center cross bar.

Step 4: Attach Right Side Cross Bars and Split Legs

Insert cross bars into right side bars and attach split legs to the center cross bar.

Step 5: Connect Headboard Components

Attach headboard legs and rails to the headboard panel using bolts and dowels.

Step 6: Connect Footboard Components

Attach footboard legs to the footboard panel using bolts.

Step 7: Attach Headboard to Side Bars

Connect the headboard assembly to the left and right side bars.

Step 8: Attach Side Bars to Footboard

Connect the side bars to the footboard assembly using bolts and barrel nuts.

Step 9: Connect Bed Rails

Connect the right and left bed rails to the headboard and side bars.

Step 10: Final Tightening

Ensure all bolts are securely tightened to complete the assembly.

Limited Warranty

DOM 648 Specifications

General

Brand	DOM
Model	648
Category	Baby & Toddler Furniture
Language	English