Need help?Do you have a question about the DOM Easykey Adapt and is the answer not in the manual?
Sequence to modify the default master code.
Sequence to add new user codes.
Sequence to open the device using a user code.
Sequence to cancel specific user codes.
Sequence to remove all stored user codes.
Sequence to set a free-entrance code.
Sequence to manage the free-entrance mode.
Install the lockcase with its insulator and fix it in place.
Ensure the handle opening screw is correctly positioned.
Position spindle and attach escutcheons and covers.
Connect wires by matching pairs.
Install and fix the cylinder with a screw.
Secure the entire lock in place using provided screws.
Fit handles and washers onto spindles.
Place the battery into the holder with correct pole orientation.
Secure the battery cover with the supplied screw.
Instructions for assembling and disassembling the handle.
Table of standard cylinder dimensions based on door thickness.
Table of standard spindle and screw lengths by door thickness.
To Next Page
General
