To Next PageTo Next Page
Need help?Do you have a question about the Dometic 441003.701 and is the answer not in the manual?
General| Model | 441003.701 |
|---|---|
| Cooling Capacity | 13, 500 BTU/h |
| Heating Capacity | 11, 000 BTU/h |
| Frequency | 60 Hz |
| Weight | 90 lbs |
| Type | Heat Pump |
| Voltage | 115 VAC |
| Power Consumption (Heating) | 1000W |
Identifies the safety alert symbol used to warn about potential physical injury hazards.
Explains signal words (WARNING, CAUTION, NOTICE) indicating hazard levels and property damage.
Emphasizes reading and following all instructions and codes for safe installation and operation.
Provides critical warnings about professional installation, product modification, and authorized accessories.
Lists the tools necessary for the installation of the unit.
Discusses factors affecting the air conditioner's performance due to RV heat gain.
Details the cooling, dehumidifying, filtering, and heating functions of the unit.
Explains condensation formation and how to reduce it during operation.
Specifies the handling of the drain tube during various operational states.
Outlines the conditions and limitations for heat pump mode operation.
Presents detailed technical specifications, ratings, and dimensions for the unit models.
Defines the necessary dimensions for the unit's installation compartment and wall opening.
Guides on selecting the optimal installation location within the RV.
Describes available accessories for air distribution grilles and registers.
Details safety precautions and steps for preparing the RV for unit installation.
Specifies the electrical wiring needed for 120 Vac, 12 Vdc, and thermostat connections.
Provides guidelines for selecting the best location for thermostat installation for comfort.
Covers the physical mounting of the unit, including clamps, fittings, and sealing.
Details the 120 Vac power supply and low voltage wiring connections to the unit.
Explains how to connect the communication cable and install the thermostat.
Guides on verifying all system features and connections after installation.
Illustrates the wiring schematic for an earlier version of the unit.
Shows the wiring schematic for a later version of the unit.
Identifies various components and parts used during the installation process.
