Keep temperature fluctuation as low as possible. Only open the cooling box as often and for as long as
necessary. Store the foodstuff in such a way that the air can still circulate well.
Adjust the temperature to the quantity and type of the foodstuff.
Foodstuff can easily absorb or release odor or taste. Always store foodstuff covered or in closed
containers/bottles.
6.2 Saving energy
Choose a well ventilated location which is protected from direct sunlight.
Allow warm food to cool down first before placing it in the cooling device to keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
If the cooler has a basket: For optimal energy consumption, position the basket according to its position on
delivery.
On a regular basis, make sure the lid seal still fits properly.
6.3 Using the cooler in DC mode
Proceed as follows (fig.6):
1. Place the cooler on a firm, level surface.
2. Plug the DC connection cable (fig. 2 1 and fig.3 1 ) into the DC socket in the vehicle.
√ The cooler starts cooling the interior.
Pull out the DC connection cable to switch off the cooler
6.4 Connecting to vehicle power
NOTE
If you connect the cooling device to the vehicle power, remember that you may have to turn on the
ignition to supply it with power.
6.5 Using the cooler in AC mode
Proceed as follows (fig.7):
1. Place the cooler on a firm, level surface.
2. Plug the AC connection cable (fig.2 2 and fig.3 2) into the AC mains.
3. Turn the cooling level controller (fig. 4 1 and fig.5 1) to the required position.
√ The cooler starts cooling the interior.
6.6 Connecting the cooler to a gas supply
WARNING!
To Next Page
Loading...
