d).
The fuse of the DC plug has blown.
Replace the fuse of the DC plug with one
of the same rating.
The vehicle fuse has blown.
Replace the vehicle fuse in the DC socket
(usually 15 A) (Please refer to the operati
ng manual of your vehicle).
In AC mode: The cooler is
not working (plug is inserte
d).
No voltage present in the AC socket. Try using another plug socket.
In gas mode: The cooler is
not working (the cooler is c
onnected to the gas).
The cooler is not properly connected
to the gas.
Check if the gas supply is in full working o
rder.
Check if the valve on the gas bottle is ope
n.
Check if there is still gas in the bottle.
Check if several energy sources are conn
ected at the same time.
Hold down the cooling level controller lon
ger to ignite the flame.
The cooler does not start u
p after a long period of inac
tivity
–
Disconnect the device from the power
supply, turn it upside down and wait for fiv
e minutes.
Turn the cooler the right way up again
and switch it on again.
10 Disposal
To Next Page
Loading...
