To Next PageTo Next Page
Need help?Do you have a question about the Dometic AH-Passport I/O Compact and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | AH-Passport I/O Compact |
| Category | Control Unit |
| Language | English |
Explains safety alerts, signal words, and directives for safe operation.
Defines the purpose and application scope of the Passport I/O controls.
Lists recommended tools and materials for installing the Passport controls.
Details the buttons and indicators on the Legacy Passport control display.
Lists display panel and cut-out dimensions for Legacy and Compact models.
Details standard and maximum cable lengths for display and sensor cables.
Outlines available inputs for DX and CW systems, including optional sensors.
Lists operating ranges, accuracy, voltage limits, and power consumption.
Illustrates the wiring connections for DX Passport control systems.
Illustrates the wiring connections for CW Passport control systems.
Covers warnings and initial steps for installing the Passport controls.
Guides on choosing a location and preparing the wall for the display.
Steps for mounting and connecting optional sensors to the control board.
Process for preparing the surface and attaching the display panel.
Explains how heating and cooling cycles operate based on system type.
Discusses temperature differentials for CW systems and heating/cooling overlap.
Explains reversing valve operation and the de-icing cycle for DX systems.
Covers self-test, hour meter, and service history log for DX systems.
Guides on powering on and selecting system operating modes.
Details Cool, Heat, Dehumidification, Automatic, and Off modes.
Explains manual and automatic fan speed settings and operation.
Details button combinations for various functions like viewing set points and activating modes.
Explains combinations for Dehumidification, sensor temp, self-test, and hour meter.
Step-by-step guide to access the programming menu on the Passport control.
Instructions on how to adjust and save parameter settings as new defaults.
How to revert settings, exit programming mode, and understand parameter selection.
Lists parameters, their ranges, and explains their functions.
Explains fault codes and how they trigger lockouts, referencing fail-safe levels.
Guides on adjusting voltage reading for accurate low voltage calculations.
Visual overview of the Passport control's menu flow and parameter structure.
Procedure to test Passport control functionality after installation or service.
Guide for inspecting, cleaning, and reinstalling the return-air filter.
Instructions for energizing valves and checking seawater strainers.
Steps to clean the condenser coil to prevent marine growth fouling.
Method for winterizing the system to prevent freezing damage.
Table of common problems, causes, and recommended solutions for the system.
Guidance on disposing of packaging materials and the product responsibly.
Provides contact details and website for limited warranty information.
