Operation C35F, C55F, C75F
20
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
7.4 Switching on and off
➤ To switch on and off, press the button for at least 5 seconds.
7.5 Setting the temperature
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the wine cooler as
often and for as long as necessary. Store the wine bottles in such a way that the
air can still circulate well.
• Adjust the temperature to the quantity and type of the wine bottles.
Setting the unit (°C or °F)
You can select whether the temperature is displayed in Fahrenheit or Celsius.
➤ Press the button for 5 seconds.
✔ The unit is converted and the display shows the temperature in the selected unit.
Increasing and decreasing the temperature
➤ Press the corresponding
or button to set the temperature.
✔ The display flashes while you adjust the setting.
✔ Once you have set the temperature, the display shows the current temperature
of the interior.
I
Checking the set temperature
➤ Press the or button briefly.
NOTE
When using the wine cooler for the first time or if it has not been used for
a long time, the inner temperature could differ from the one you have
set. The temperature display flashes as long as this is the case. Once the
set temperature has been reached, the temperature display lights up
constantly.
DometicC35F-C55F-C75F_OPM_4445103475_EMEA11_xxxx-xx-xx.book Seite 20 Montag, 13. September 2021 7:15 19
To Next Page
Loading...
Need help?
General
