22
EN
Service Procedures Refrigerators
7.14 Replacing the Crisper Bin Shelf
31 Replacing the Crisper Bin Shelf
1. Open the refrigerator door.
2. Slightly li the rear of the crisper bin shelf and pull it
toward the front of the unit to remove it.
3. Complete these steps in reverse order to install the
new crisper bin shelf.
7.15 Replacing the Crisper Bin Door
32 Replacing the Crisper Bin Door
1. Open the refrigerator door.
I
The crisper bin door has two prongs, one on either
side, slightly protruding into the cabinet liner.
2. Gently bend the door in the middle and pull on one
side until the prong is removed from the liner.
3. Continue to pull the door toward the front of the unit
until the prong on the other side of the door is free
from the liner and the entire door is removed.
4. Complete these steps in reverse order to install the
new crisper bin door.
7.16 Replacing the Wire Shelving
33 Replacing the Wire Shelving
1. Open the refrigerator door.
2. Gently li the rear of the shelf, as close to the back
wall as possible, until the hook features on each side
of the shelf clear the recesses in which they rest.
3. Pull the shelf toward the front of the unit until fully
removed.
4. Complete these steps in reverse order to install the
new wire shelving.
To Next Page
Loading...
