Dometic CFX28 - Setting the Temperature; • Cfx65 Dz

EN
CFX28 – CFX100W Operation
19
I
✓ The cooler starts cooling the interior.
I
Latching the cooler lid
➤ Close the lid.
➤ Press the latch (fig. 2 1, page 2) down, until it latches in place audibly.
7.6 Setting the temperature
➤ Press the “SET” button (fig. 3 4, page 3) once.
➤ Use the “UP +” (fig. 3 7, page 3) and “DOWN –” (fig. 3 6, page 3) buttons to
select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
NOTE
Displayed temperature
• CFX28, CFX35W, CFX40W, CFX50W, CFX65W, CFX100W:
The temperature displayed is that of the large interior compartment
(e.g. CFX50W, CFX65W: fig. 7 1, page 5).
• CFX65DZ:
– With fridge/freezer divider in: The temperature displayed is that
of the freezer compartment (fig. 8 1, page 5).
– With fridge/freezer divider out: The actual compartment
temperature will be considerably warmer than the displayed
temperature
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The LED “P” flashes orange.
CFX28-CFX100W--O-16s.book Seite 19 Freitag, 10. März 2017 4:46 16