EasyManua.ls Logo

Dometic CoolFun CK 40D Hybrid - Troubleshooting; Device Not Working; Operation Issues from DC Socket; Guarantee

Dometic CoolFun CK 40D Hybrid
198 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
CK40D Hybrid Troubleshooting
13
8 Troubleshooting
9Guarantee
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see back page) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
Problem Possible cause Suggested remedy
Your device is not
working (plug is
inserted).
There is no voltage flowing
from the DC socket
(cigarette lighter) in your
vehicle.
The ignition must be switched on in
most vehicles to supply current to the
cigarette lighter.
No voltage present in the
AC voltage socket.
Try using another plug socket.
The inner fan or the cooling
element or the compressor
is defective.
This can only be repaired by an
authorised repair centre.
When operating from
the DC socket
(cigarette lighter):
The ignition is on and
the cooler is not
working.
The fuse of the DC plug is
dirty. This results in a poor
electrical contact.
If the plug of your cooler becomes
very warm in the DC socket fitting,
either the fitting must be cleaned or
the plug has not been assembled
correctly.
The fuse of the DC plug has
blown.
Replace the fuse of the DC plug with
one of the same rating (fig. 3 1,
page 3).
The vehicle fuse has blown. Replace the vehicle's DC socket fuse
(usually 15 A). (Please refer to the
operating manual of your vehicle.)
CK40D-Hybrid-O-16s.book Seite 13 Freitag, 8. November 2019 8:25 08

Table of Contents

Related product manuals