CoolMatic Using the refrigerator
23
8 Using the refrigerator
I
8.1 Energy saving tips
• Choose a well ventilated installation location which is protected from direct
sunlight.
• Allow hot food to cool down first before you put it in the refrigerator.
• Do not open the refrigerator more often than necessary.
• Do not leave the door open for longer than necessary.
• Defrost your refrigerator as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at regular intervals.
8.2 Using the refrigerator
The fridge conserves fresh foodstuffs. The freezer compartment conserves frozen
foodstuffs and freezes fresh foodstuffs.
A
➤ Switch the refrigerator on by turning the temperature control (fig. 6 1 page 4)
clockwise.
NOTE
Before starting your new refrigerator for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter “Cleaning and care” on page 27).
NOTICE!
• Do not place any electrical devices inside the cooler. The only
exceptions are devices approved for the purpose by the
manufacturer.
• Ensure that food or liquids in glass containers are not excessively
cooled.
Liquids expand when they freeze and can thus destroy the glass
containers.
• Food may only be stored in its original packaging or in suitable
containers.
• Ensure that the objects placed in the refrigerator are suitable for
cooling to the selected temperature.
CR50-65-80-110-140--O-US.book Seite 23 Donnerstag, 13. Oktober 2016 2:37 14
To Next Page
Loading...
