7
Operating and Installation
Instructions for your Dometic
Wine Cellar
Introduction
Thank you for choosing the Dometic Wine Cellar.
Please read the following instructions carefully before
installing your new wine cellar. We trust you will be
completely satisfied with your purchase.
The wine cellar must be installed and used according
to these instructions in order for it to operate correctly
and economically.
Transit damage
Inspect the wine cellar for transit damage. You must
report any damage the company responsible for the
delivery within the legal or stated time for this type of
product. If there is no such established report time, the
damage must be reported within seven days of
delivery.
Data plate
Check the data plate, inside the wine cellar at the top
left, to ensure you have received the right model.
The data plate shows details that you will need to
quote if you have to contact service personnel. It is a
good idea to make a note of them here.
Model designation ……………
Product number ………………
Serial number …………………
Voltage …………………………
Congratulations to your choice of a Dometic Wine Cellar !
Accessories
Please check that the following accessories are
attached to the wine Cellar or in the separate
cardboard box for accessories wich is placed inside
the wine Cellar.
At the back:
1. Distance bar (to ensure distance to wall behind)
Accessories box:
1. Instruction manual
2. Handle
3. Drip tray
4. Shelf support
5. Keys
6. Storage shelf
Necessary additional tools not incuded
1. Screwdriver (star quad )
2. Adjustable spanner or fixed spanner ( 21mm )
1
4
3
2
1
6
5
To Next Page
Loading...
Need help?
General
