Dometic CT4110 - Electric Connection; System Diagrams; 4.6.1.1 General System Diagram

EN
13
Installing the toilet
4.6 Electric connectionNote the
following instructions before installa-
tion of the cassette toilet:
4.6.1 System diagrams
Connect the
toilet to a suitable power
4.6.1.1 General system diagramsupply via the main connection block of the vehicle
(Fig. 31).
 The toilet must not be directly
connected in parallel to other electrical
circuits, otherwise malfunctions or damage
to the toilet controller can occur (Fig. 32).
 A line fuse is not necessary as the
toilet is fused internally.
CAUTION!
Electric connection must be carried out by
trained staff.
Fig. 32
Fig. 31
V DC
12
Battery
Toilet
CT 4000
Water pump
Do NOT connect for use of a
pressurised water pump!
Toilet
CT 4000
Water pump
+
!
+
!
+
!
+
!
V DC
12
Do not connect toilet to the power supply
directly in parallel with other electrical cir-
cuits.
NOTICE!