NDA1402
When installing the refrigerator, make sure to separate the
combustion system from the living space of the mobile home
or recreational vehicle. An opening toward the outside at floor
level in the refrigerator compartment must be provided for
ventilation of heavier-than-air fuel gases.
VENTILATION HEIGHTS
It is essential that all maximum or minimum dimensions are
strictly maintained as the performance of the refrigerator is
dependent on adequate flow of air over the rear of the refrigera-
tor. For an installation with roof vent and lower side vent, the
minimum ventilation height should be 69-1/8 inches
(1756
mm).
The upper vent should
be centered over the
condenser coil at the
back of the refrigerator.
I
I
I
I
I
I
I
I
I
I _-
",,-
.!:.-::::.-
'r -- -
I- -::::::Vf*-----i--if-
...
H
I I
I I
I I
I
Ventilation
height
CLEARANCES
Minimum clearances (in inches) to combustible materials:
Top (G)
Side (K)
Bottom (L)
o
o
o
G
OVERALL AND RECESS DIMENSIONS
..
OVERALL DIMENSIONS
Height (A)
mm
1632
inches
64-17/64
Width (B)
mOl
855
inches
33-11116
Depth (C)
mm
752
inches
29-5/8
RECESS DIMENSIONS
Height (H)
mm
1605
inches
63-3/16
Width (W) mm
832
inches
32-3/4
Depth
(D)
mm
662*
inches
26-1116*
*
Add
1" (25
mm) depth for units with one or two optional
ventilator fans.
SIDEVIEW
1
A
VIEW FROM ABOVE
c
B
- 4-
To Next Page
Loading...
