13
Changing the doorhang6.7
1. Open the door,
unscrew the hinge
screw and keep it to
hand.
2. Take off the door by
moving it in your
direction.
If it is necessary to tilt or lay the fridge onto the side,
wait for one hour, before taking the fridge into ope-
ration. The cooling agent runs back into the reser-
voir of the cooling unit. Thus a correct operating of
the fridge is guaranteed.
Loosen
hinge pin.....
... and screw it in at
opposite side.
Transfer distance washer on lower hinge.
7. Shove door into upper hinge pin
and put it on lower hinge.
8. Screw in hinge screw.
Check that the door moves freely and the gasket seals completely
when the door ic closed.
5.
6.
3. 4.
1.
2.
3.
4.
5.
6.
To Next Page
Loading...
