14
Changing the decor panel
Assembling the doorgrip
Spare parts
6.8
Dimensions of the panels in mm:
Model Hight Width Thickness
RGE 2000 718+/-1 491,5+1 3,2
2. Unscrew the
door strip
(3 screws).
2. Adjust door handle
at the door and
screw onto it.
1. The fixing points are
marked on both sides.
3. Attach cover and fix by
pushing.
3. Remove the decor
plate and insert a
new decor plate
4. Screw the door
strip back in position.
5. Put in door, as described above.
1. Disassemble the door, as described in "6.7"
6.9
6.10
Parts can be ordered from the Dometic Customer Service.
When contacting Dometic Service, please state the model, product number and serial
number together with the MLC Code, if applicable.
You will find this information on the data plate inside the refrigerator.
To Next Page
Loading...
