15
Refrigerator operation
5.5.4 Setting of cooling compartment
temperature
Select the desired cooling compartment tem-
perature by turning the rotary knob (2) .
The scale starts with MIN position (small bar =
highest temperature) and climbs up to MAX
position (large bar = lowest temperature).
Note: The temperature levels do not relate to
absolute temperature values.
Fig. 14
2
medium setting
5.5.3 Gas operation (Liquid gas)
Prior to starting the refrigerator in gas
mode :
Open the gas cylinder valve.
3. Activate Piezo ignition (3) several times at
intervals 1-2 second.
4. Once the flame ignites, the pointer of galva-
nometer (4) begins moving into the green
range. Keep knob (2) depressed for
approx. 15 seconds and finally release it.
The refrigerator is operational.
5.5.2 Electrical operation
Fig. 9
Fig. 10 Fig. 11
Switch on the appliance by turning the energy
selection switch (1) clockwise to position :
230V operation.
1. Turn the rotary selector switch (1) to
position
2. Turn the temperature selector (2) clockwise
and push. Keep the controller button
depressed.
1
1
2
gas operation.
Fig. 13Fig. 12
2 3 4
To Next Page
Loading...
