18
Refrigerator operation
Fig. 32
Fig. 33
Fig. 30
5.12 Changing the doorhang
1
3
Fig. 31
2
4
n Open the door, unscrew the hinge screw
and keep it to hand.
n Take off the door by moving it in your direc-
tion.
n Loosen hinge pin and screw it in at opposi-
te side.
n Transfer distance washer on lower hinge.
n Shove door into upper hinge pin and put it
on lower hinge.
n Screw in hinge screw.
n Check that the door moves freely and the
gasket seals completely when the door is
closed.
If it is necessary to tilt or lay the fridge onto the
side, wait for one hour, before taking the frid-
ge into operation. The cooling agent runs back
into the reservoir of the cooling unit. Thus a
correct operating of the fridge is guaranteed.
Fig. 29
2
3
1
4
5.13 Changing the decor panel
Decor panel with frame
n Remove door grip first (if assembled)
n Remove the lateral ledge (1) the door
(ledge is attached, not screwed).
n Shift decor panel (2) away from the door
and insert the new decor panel. Re-attach
ledge (1) .
Fig. 34
2
1
1
i
To Next Page
Loading...
