Dometic RGE Series - Setting of Cooling Compartment Temperature; Interior Lighting Battery Replacement; Positioning the Storage Racks

17
5.7 Positioning the storage racks
Two of the storage racks are secured. In this
way inadvertent entrappment and suffocation
of children is prevented, if the storage racks
are removed. To protect children it must be
avoided to create space for children in the
cooling compartment.
Fig. 16
The storage racks may be pulled out by loose-
ning the two locking devices (1) underneath.
For loosening pull the slider to the middle, for
fastening pull them sidewards.
If it is necessary to remove these storage
racks (i.e. for cleaning) loosen the locking pins
(2) at first as shown, by means of a suitable
screw driver.
Put in place the locking pins after removing
the storage racks.
Do not remove these storage racks.
Thus children have no space to be
entrapped in the refrigerator.
WARNING!
1
1
2
Fig. 12
Fig. 13
Fig. 14
1
Fig. 15
4
2
3
Refrigerator operation
5.5.4 Setting of cooling compartment
temperature
Select the desired
cooling compartment
temperature by turning
the rotary knob (2) .
The scale starts with
MIN position (small
bar = highest tempe-
rature) and climbs up
to MAX position (large
bar = lowest tempera-
ture).
Note: The temperature levels do not relate to
absolute temperature values. Please select the
medium setting (3) for ambient temperatures
between +15°C and +25°C. The unit operates
within its optimum performance range.
Fig. 11
medium setting
2
3
The battery-operated interior lighting is con-
trolled using a door contact. To replace the
batteries (3 x 1.5 V AAA/R3/Micro), remove the
lighting unit and open the battery compart-
ment using a suitable screwdriver.
5.6 Interior lighting battery
replacement
289 0317-90_2_EN_RGE4000_N1_Layout 1 03.02.2014 13:36 Seite 17