Dometic RM 5330 - Page 81

EN
RM5310, RM5330, RM5380 Safety instructions
81
2.4 Operating the device safely at 230 Vw
A
NOTICE!
 Only connect the unit to the AC mains with the appropriate
connection cable.
 Never pull the plug out of the socket by the connection cable.
 If the connection cable is damaged, it must be replaced with a
connection cable of the same type and specification by qualified
employees in order to prevent safety hazards.
 Before starting the device, ensure that the power supply line
and the plug are dry.
 Check that the voltage specification on the type plate is the
same as that of the power supply.
2.5 Operating the device safely with gas
A
NOTICE!
 Never check the device for leaks with an open flame.
 Use only propane or butane gas (no natural gas).
 The device may only be operated at the pressure specified on
the type plate. Use a DIN-DVGW-approved pressure regulator
with permanent settings in line with DIN EN 12864.
 Never store liquid gas cylinders in unventilated places or below
ground level (funnel-shaped pits in the ground).
 Keep liquid gas cylinders away from direct sunlight. The
temperature may not exceed 50 °C.
 It is not permitted to operate the device with gas on ferries and
at petrol stations.
 If you smell gas:
– Close the shut-off valve on the gas supply and the cylinder
valve.
– Open the windows and leave the room.
– Do not operate any electrical switches.
– Extinguish open flames.
– Have the gas system checked by a specialist company.